Previous Page Next Page

Chart Wizard (Query Based)

This wizard appears when you do either of the following:

• In the Select Component for Page Report Tab dialog or Select Component for Page Report dialog, select the Chart component and then click OK. In this case, it helps you create a page report with a chart in it based on a query resource.
• Right-click a chart created on a query and click Chart Wizard on the shortcut menu. In this case, it helps you modify the chart.

The wizard consists of the following screens:

• Data
• Type
• Display
• Filter
• Layout
• Style

Back

Goes back to the previous screen.

Next

Goes to the next screen.

Finish

Finishes creating or modifying the chart and closes this wizard.

Cancel

Does not retain changes and closes this wizard.

Help

Displays the help document about this feature.

Data

Specifies the dataset for the chart.

Resource box

Lists the available data resources in the current catalog. Select one to create the chart.

More Options/Less Options

Shows or hides the dataset selection panel to choose a dataset for the chart.

• New Dataset
  If checked, select a data resource from the current catalog to create a dataset that will be used to build the chart. When you choose to create the dataset from a query, you can click the Edit button to edit the query in the Query Editor if required.
• Existing Dataset
  If checked, select a dataset from the ones existing in the open report to create the chart. Click the Edit button to edit the selected dataset in the Dataset Editor if required.
• Current Dataset
  If checked, the current dataset used by the parent object will be applied to the chart.

Type

Specifies the type of the chart. You can refer to the section Chart Types which describes each of the chart type in detail.

Single chart

Specifies to create a single chart.

• Chart Type
  Lists all the chart types that can be used to create a single chart.
• Sub type box
  Lists all the sub types of the selected chart type.

Combo chart

Specifies to make more than one type use the primary or secondary axis. The types should be featured as Combination charts. Two types of data markers are used to represent different data values.

• Chart Type
  Lists all the chart types that can be added as a combo chart.
• Sub type box
  Lists all the sub-types of the selected chart type.
• Chart Type Groups
  Lists all the chart types that are to be used in the combo chart.
  • Primary Axis
    • <Add Combo Type>
      Adds a chart type to the primary axis.
  • Secondary Axis
    • <Add Combo Type>
      Adds a chart type to the secondary axis.
• 
  Removes a specified chart type from the Chart Type Groups box.

Display

The Display screen differs with chart types: common chart types, organization chart, or heat map.

For common chart types

Specifies the data displayed on the chart.

Resources

Lists all the available data resources in the selected dataset.

Adds the selected fields to be displayed in the chart.

Removes the selected fields from the chart if they are not required.

Replaces the selected field in the chart with the specified field in the Resources box.

Category/Series

Lists the field you want to display on the category/series axis of the chart.

For a real time chart, if no category field is specified, Use System Refresh Time will be automatically displayed in the Category box, namely, the time at which the chart refreshes itself will be used as the category value; the series axis will be disabled.

• Special Group
  Opens the User Defined Group dialog to define how to group information.
• Special Function
  Opens the Special Function dialog to define some special function to the field.
• Order/Select N
  Opens the Category Options dialog or Series Options dialog to specify the sort order of the category or series values and define the number of the category or series values that will be displayed in the chart.

Show Values

Lists the values you want to show in the chart. For a back-to-back bench chart, only one value can be added.

• 
  Opens the Edit Additional Value dialog to edit an additional value. Available only when a constant value or an average value is selected in the Show Values box.
• 
  Moves the selected value one step up.
• 
  Moves the selected value one step down.
• 
  Adds a new pair of Y Axis and Radius for the bubble chart.
• 
  Removes the selected field from the bubble chart if they are not required.
• X Axis
  Lists the value you want to show on the X axis of the bubble chart.
• Y Axis
  Lists the value you want to show on the Y axis of the bubble chart.
• Radius
  Lists the value you want to show as the bubble radius.
• Left
  Lists the value you want to show on the origin left of the value axis. Only one value can be added. Available to 2-D back-to-back bench chart only.
• Right
  Lists the value you want to show on the origin right of the value axis. Only one value can be added. Available to 2-D back-to-back bench chart only.

Series Values

If checked, you can specify the series values on the origin left/right of the value axis one by one manually. Only one of the Left and Right boxes can be edited. Available only when a back-to-back bench has a series field.

• Left
  Lists the series values on the origin left of the value axis.
• Right
  Lists the series values on the origin right of the value axis.
• 
  Moves the selected value one step up.
• 
  Moves the selected value one step down.
• 
  Adds a new value line. Double-click in it to specify the value.
• 
  Removes the selected value line.

Series Conditions

If checked, you can specify the series values on the origin left/right of the value axis using condition. Only one of the Left and Right boxes can be edited. Available only when a back-to-back bench has a series field.

• Left
  Lists the condition expression which defines the series values on the origin left of the value axis.
• Right
  Lists the condition expression which defines the series values on the origin right of the value axis.
• 
  Opens the Edit Conditions dialog to edit the condition which defines the series values on the origin left/right of the value axis.
• 
  Removes the added condition.

For organization chart

Specifies the data displayed on the chart.

Node

Specify a field from the drop-down list which identifies the entity.

Parent

Specify a field from the drop-down list which shows the "reporting to" relationship among the entity members, that is, which node field member reports to or belongs to which node field member.

Resources

Lists all the available resources that can be added in the org chart.

Properties

The Properties box presents a node model of the org chart. Data fields, labels and images can be inserted into the node as the information about the entity in the org chart.

For heat map

Specifies the data displayed on the chart.

Resources

Lists all the available data resources in the selected dataset.

Groups

Lists the fields used to group the data to different areas. There should be at least one group. When there are multiple groups, their levels are defined by their positions from top down. The group at the top is of the highest level and the bottom the lowest.

• Color By
  Specifies whether to color by a group. 0-n groups can be used as the color-by fields.
• Label By
  Specifies whether to show the group name in the innermost rectangle.
• Special Group
  Opens the User Defined Group dialog to define how to group information.
• Special Function
  Opens the Special Function dialog to define some special function to the field.
• Order/Select N
  Opens the Group Options dialog to specify the sort order of the group values and define the number of the group values that will be displayed in the chart.

Summaries

Lists the summaries used to do size-by/color-by or displayed in the innermost rectangle.

When no group is specified in the Groups box, you can insert any static summary, and its group-by field will be inserted into the Groups box automatically. When there are multiple groups, static summaries should match the lowest-level group. For example, if the groups level is A > B > C, the static summaries grouped by C can be inserted into the Summaries box, but the static summaries grouped by A, B or other fields cannot.

• Size By
  Specifies to size by one summary or none.
• Color By
  Specifies to color by one summary or none.
• Label By
  Specifies whether to show a summary in the innermost rectangle.

Filter

Specifies to filter the data used in the chart. This screen is available only when you create a chart.

The options in the screen are the same as those in the Edit Filter dialog.

Layout

The Layout screen differs with chart type: common chart types, organization chart, or heat map.

For common chart types

Specifies the layout of the chart elements.

Data

• Category Start Offset
  Specifies the start offset of category from which the chart will be displayed.
• Category End Offset
  Specifies the end offset of category to which the chart will be displayed.
• Series Start Offset
  Specifies the start offset of series from which the chart will be displayed.
• Series End Offset
  Specifies the end offset of series to which the chart will be displayed.
• Reverse Category
  Specifies whether to reverse the display order of the categories.
• Reverse Series
  Specifies whether to reverse the display order of the series.
• Swap Groups
  Specifies to display values from different data fields by switching data between the category and series axes, the category and values axes.

Title

• Chart Title
  Specifies the title of the chart.
• Category (X) Axis Title
  Specifies the title of the X-axis.
• Value (Y) Axis Title
  Specifies the title of the Y-axis.
• Value (Y2) Axis Title
  Specifies the title of the Y2-axis.

Axis

• Show Category (X) Axis
  Specifies whether to show the category (X) axis in this chart.
• Show Value (Y) Axis
  Specifies whether to show the value (Y) axis in this chart.
• Show Value (Y2) Axis
  Specifies whether to show the value (Y2) axis in this chart.
• Show Series (Z) Axis
  Specifies whether to show the series (Z) axis in this chart.

Wall

• Show Wall
  Specifies whether to show the wall in this chart.
• Show Floor
  Specifies whether to show the floor in this chart.

Gridlines

• Show Category (X) Axis Gridlines
  Specifies whether to show the gridlines of category (X) axis.
• Show Value (Y) Axis Gridlines
  Specifies whether to show the gridlines of value (Y) axis.
• Show Value (Y2) Axis Gridlines
  Specifies whether to show the gridlines of value (Y2) axis.
• Show Series (Z) Axis Gridlines
  Specifies whether to show the gridlines of series (Z) axis.

Legend

• Show Legend
  Specifies whether to show the legend in this chart.

Export

• Mapping Component
  Specifies the component to which the chart will be mapped. For details, see Creating Dynamic Chart in Excel.

For organization chart

Specifies the layout of the chart elements.

Type

Specifies the layout mode of the org chart.

• Top down
  The org chart tree expands from top to bottom.
• Bottom up
  The org chart tree expands from bottom to top. It is the reverse of the top down type.
• Left right
  The org chart tree expands from left to right.

Title

• Chart Title
  Specifies the title of the chart.

Export

• Mapping Component
  Specifies the component to which the chart will be mapped. For details, see Creating Dynamic Chart in Excel.

For heat map

Specifies the layout of the chart elements.

Title

• Chart Title
  Specifies the title of the chart.

Legend

• Show Legend
  Specifies whether to show the legend in this chart.

Style

Specifies the style of the chart.

Style

Specifies the style of the chart.

• <Custom>
  There is no style information on it and it is only used to support reports built with previous versions which did not bind any style or the bound style cannot be found in the style list.

Preview

Displays a diagram illustrating the effect of the selected style on the chart.

Inherit Style

Specifies whether to make the chart take the style of its parent. This options is available only when you modify a chart and the chart is inserted into a banded object or table.

Page Setup

Opens the Page Setup dialog to specify page properties. Available only when creating a chart.

Previous Page Next Page