Previous Page Next Page

Format Donut (for Library Component)

This dialog appears when you double-click a donut of a chart in a library component, or right-click it and select Format Donut from the shortcut menu. It helps you to format donuts of a chart, and consists of the following tabs:

• General
• Fill
• Border
• Data Label
• Behaviors

OK

Accepts the formatting of the donuts and closes the dialog.

Cancel

Cancels the formatting of the donuts and closes the dialog.

Apply

Accepts the formatting of the donuts and leaves the dialog open.

Help

Displays the help document about this feature.

General

Specifies the options which are available when you format a donut chart.

Gap Amount

Specifies the gap between two donuts.

Explode Amount

Specifies the gap between every section and the central point of a donut.

Data Label Type

Specifies the display type for data value in the data label.

• value
  Shows the value for each pie section.
• category name
  Shows the category name for each pie section.
• percent
  Shows the percentage of each pie section to the total.
• value percent
  Shows the value and the percentage for each pie section.
• category name, value
  Shows the category name and value for each pie section.
• category name, percent
  Shows the category name and percentage for each pie section.
• category name, value, percent
  Shows the category name, value and percentage for each pie section.

Donut Hole

Specifies the radius percentage of the donut hole to the total pie circle.

Show Donut Name

Specifies whether to show the name of the donut.

Fill

Specifies the color, fill effect and transparency for the donut sections.

Use Single Color

If checked, the donut sections will use the single color pattern.

• Color
  Specifies the color schema for the selected donut sections in the same data series. To edit the color, click the color image and select a color from the color palette or input the hexadecimal value (for example, 0xff0000) of a color directly in the text box.
• Transparency
  Specifies the transparency of the color schema.
• Color List
  Opens the Color List dialog to modify color pattern for donut sections in the same data series respectively.

Use Single Color with Condition

If checked, each donut section can have its single color pattern based on defined conditions. You can click the Advanced or Normal button to switch between the two editing modes to edit the conditions.

• Normal
  • Select Field
    Lists all the available fields to which the conditional fill can be applied. Select the field on which you want to define the conditions from the drop-down list.
  • Values
    Specifies the value of the condition. Available when you select a category or series field or a field whose return value is not a number from the Select Field drop-down list.
  • Start Value
    Specifies the start value of the condition. Available only when you select a value field or a field that returns a number from the Select Field drop-down list.
  • End Value
    Specifies the end value of the condition. Available only when you select a value field or a field that returns a number from the Select Field drop-down list.
  • Color
    Specifies the color that will be applied to the values which meet the condition.
  • Transparency
    Specifies the transparency for the color of the condition.
  • 
    Adds a new condition line.
  • 
    Removes the selected condition line.
  • Label
    If checked, you can modify the condition expression of the selected condition line which will be shown as the legend entry label.
  • Value
    Specifies to display data in the condition expression as value. Available only when you select a value field or a field that returns a number from the Select Field drop-down list.
  • Percent
    Specifies to display data in the condition expression in percent. Available only when you select a value field or a field that returns a number from the Select Field drop-down list and takes effect only on 100% Stacked Bar/Bench 2-D chart and 100% Stacked Bar/Bench 3-D chart.
• Advanced
  • Condition
    Displays the condition you have defined in the Edit Condition dialog.
  • Color
    Specifies the color that will be applied to the values which meet the condition.
  • Transparency
    Specifies the transparency for the color of the condition.
  • 
    Opens the Edit Conditions dialog to create or edit a condition.
  • Label
    If checked, you can modify the condition expression of the selected condition line which will be shown as the legend entry label.
  • Value
    Specifies to display data in the condition expression as value. Available only when you select a value field or a field that returns a number from the Select Field drop-down list.
  • Percent
    Specifies to display data in the condition expression in percent. Available only when you select a value field or a field that returns a number from the Select Field drop-down list.

Use Multiple Colors with Condition

Not supported on donut chart.

Sample

Displays a preview sample of your selection.

Border

Specifies the properties for the border of the donuts, which take effect only when the Border property on chart paper is set to true in the Report Inspector.

Border Type

Displays the type for border of the donuts. The default value is solid, and cannot be changed.

Color

Specifies the color for the border of the donuts.

Transparency

Specifies the transparency for color of the border.

Line Style

Specifies the line style to apply to the border of the donuts.

Thickness

Specifies the thickness of the border, in pixels.

End Caps

Specifies the ending style of the border line.

• butt
  Ends unclosed sub paths and dash segments with no added decoration.
• round
  Ends unclosed sub paths and dash segments with a round decoration that has a radius equal to half of the width of the pen.
• square
  Ends unclosed sub paths and dash segments with a square projection that extends beyond the end of the segment to a distance equal to half of the line width.

Line Joint

Specifies the line joint style for the border line.

• miter
  Joins path segments by extending their outside edges until they meet.
• round
  Joins path segments by rounding off the corner at a radius of half the line width.
• bevel
  Joins path segments by connecting the outer corners of their wide outlines with a straight segment.

Sample

Displays a preview sample of your selection.

Path

Specifies the fill pattern of the border line.

• Outline Path
  Specifies the fill pattern of the border line to be outline path.
• Fill Path
  Specifies the fill pattern of the border line to be whole path.

Dash

Specifies the dash size of border line.

• Auto Adjusted Dash
  If selected, the dash size will be adjusted automatically.
• Fixed Dash Size
  If selected, the dash size will be fixed size.

Data Label

Specifies properties for data labels displayed on the donuts.

Static Data Label

Specifies properties of the static data labels on the donuts.

• Show Static Data Label
  Specifies whether or not to show the static data labels on the donuts. Only when it is checked can the following static data label related properties take effect.
• Position
  Specifies the position of the static data labels on the donuts.
  • auto fit
    If selected, the static data labels will be displayed automatically.
  • sticker
    If selected, the static data labels will be displayed beside the donut sections.
  • slim leg
    If selected, the static data labels will be displayed beside the donut sections and pointed by thin lines.
  • best fit
    If selected, the static data labels will be displayed at the best fit position automatically.
  • on slices
    If selected, the static data labels will be displayed on the donut sections (slices).
• Suppress Label When 0
  If true, the static data label whose value is 0 will not be displayed on the chart.
• Line Color
  Specifies the color of the thin lines that are used to point to the static data labels.

Font

Specifies the font format of text in the data labels.

• Font list
  Lists all the available font faces that can be selected to apply to the text.
• Font Size
  Specifies the font size of the text.
• Font Color
  Specifies the font color of the text.
• Transparency
  Specifies the transparency of the text.
• Rotation
  Specifies the rotation angle of the text around its center, in degrees. The default value is 0.
• Shearing
  Specifies the gradient of the text.

Effects

Specifies the special effects of text in the data labels.

• Style
  Specifies the font style of the text. It can be one of the following: plain, bold, italic, and bold italic.
• Strikethrough
  Specifies the style of the horizontal line with which the text is struck through. It can be one of the following: none, thin line, bold line, and double lines.
• Underline
  Specifies the style of the horizontal line under the text. It can be one of the following: none, single, single lower, bold line, bold lower, double lines, bold double, patterned line, and bold patterned.
• Superscript
  Raises the text above the baseline and changes the text to a smaller font size, if a smaller size is available.
• Embossed
  Makes the text appear to be raised off the page in relief.
• Outlined
  Displays the inner and outer borders of each character.
• Subscript
  Lowers the text below the baseline and changes the text to a smaller font size, if a smaller size is available.
• Engraved
  Makes the text appear to be imprinted or pressed into the page.
• Shadowed
  Adds a shadow beneath and to the right of the text.

Behaviors

Specifies some web behaviors to the donuts.

Adds a new web behavior line.

Removes the selected web behavior.

Moves the selected web behavior up a step.

Moves the selected web behavior down a step.

Events

Specifies the trigger event.

Actions

Specifies the action you want the event to trigger.

• 
  Opens the Web Action List dialog to bind a web action to the event.

Previous Page Next Page