Previous Page Next Page

Format Category (X) Axis (for Library Component)

This dialog appears when you double-click the category (X) axis of a chart in a library component, or right-click it and then select Format Axes > Format Category (X) Axis from the shortcut menu. It helps you to format the category (X) axis of a chart, and consists of the following tabs:

• Axis
• Tick Mark
• Font
• Orientation
• Format
• Range
• Behaviors

OK

Applies the changes and closes the dialog.

Cancel

Does not retain any changes and closes the dialog.

Apply

Applies all changes and leaves the dialog open.

Help

Displays the help document about this feature.

Axis

Specifies the general properties for the axis.

Option

Specifies the options for the axis.

• Minimum Value
  Specifies the minimum value that is to be displayed on the axis. Available only to bubble charts which use the axis to show numeric data and scatter charts.
• Maximum Value
  Specifies the maximum value that is to be displayed on the axis. Available only to bubble charts which use the axis to show numeric data and scatter charts.
• Increment
  Specifies the difference between two adjacent values on the axis. Available only to bubble charts which use the axis to show numeric data and scatter charts.
• Number of Tick Marks
  Specifies how many tick marks to be displayed on the axis. Available only to bubble charts which use the axis to show numeric data and scatter charts.
• Show Gridlines
  Specifies whether to show gridlines on the axis.

Line

Specifies the line style for the axis.

• Color
  Specifies the color of the axis. To edit the color, click the color image and select a color from the color palette or input the hexadecimal value (for example, 0xff0000) of a color directly in the text box.
• Style
  Specifies the style for the line of the axis.
• Transparency
  Specifies the transparency for the color of the axis.
• Thickness
  Specifies the thickness for the line of the axis, in pixels.

Gap

Specifies the gap properties for the labels on the axis.

• Label Axis Gap
  Specifies the distance between the label and the axis, in pixels.
• Best Effect
  Specifies whether to adjust the labels automatically to make them placed best.

Tick Mark

The tab consists of three sub tabs: Major Tick Mark, Minor Tick Mark, and Scale.

Major Tick Mark

Specifies properties of the major tick marks on the axis.

Type

Specifies the type of the major tick marks on the axis.

• None
  If selected, major tick marks will not be shown on the axis and it will be meaningless to specify all the other major tick mark related properties.
• Inside
  If selected, major tick marks will be inside the chart.
• Outside
  If selected, major tick marks will be outside the chart.
• Cross
  If selected, major tick marks will be across the axis.

Line

Specifies the line properties of the major tick marks on the axis.

• Correlate with Axis
  If checked, the line properties of the major tick marks will correlate with that of the axis automatically.
  • Color
    Specifies the color of the major tick marks.
  • Style
    Specifies the type of the major tick marks.
  • Transparency
    Specifies the transparency for the color of the major tick marks.
  • Thickness
    Specifies the thickness of the major tick marks, in pixels.
• Tick Mark Length
  Specifies the length of the major tick marks, in pixels.

Option

Specifies the other properties of the major tick mark labels on the axis.

• Show Major Tick Mark Labels
  Specifies whether to display the labels of the major tick marks on the axis. If checked, the following properties will be enabled.
• Label Every N Major Tick Marks
  Specifies the frequency at which the major tick marks will be labeled.
• Show Axis Label Tips
  Specifies whether to display the complete label text when the mouse pointer points at a label on the axis.
• Number of Major Labels
  Specifies how many major tick mark labels to be displayed on the axis.
  • Auto
    If checked, all major tick mark labels will be shown.
  • Fixed
    If checked, you can specify the number of the major tick mark labels to be displayed on the axis.

Minor Tick Mark

Specifies properties of the minor tick marks on the axis.

Type

Specifies the type of the minor tick marks on the axis.

• None
  If selected, minor tick marks will not be shown on the axis and it will be meaningless to specify all the other minor tick mark related properties.
• Inside
  If selected, minor tick marks will be inside the chart.
• Outside
  If selected, minor tick marks will be outside the chart.
• Cross
  If selected, minor tick marks will be across the axis.

Line

Specifies the line properties of the minor tick marks on the axis.

• Correlate with Axis
  If checked, the line properties of the minor tick marks will correlate with that of the axis automatically.
  • Color
    Specifies the color of the minor tick marks.
  • Style
    Specifies the type of the minor tick marks.
  • Transparency
    Specifies the transparency for the color of the minor tick marks.
  • Thickness
    Specifies the thickness of the minor tick marks, in pixels.
• Tick Mark Length
  Specifies the length of the minor tick marks, in pixels.

Option

Specifies the other properties of the minor tick marks on the axis.

• Show Minor Tick Mark Labels
  Specifies whether to display the labels of the minor tick marks on the axis. If checked, the following properties will be enabled.
• Label Every N Minor Tick Marks
  Specifies the frequency at which the minor tick marks will be labeled.
• Number of Minor Labels
  Specifies how many minor tick mark labels to be displayed on the axis.
  • Auto
    If checked, all minor tick mark labels will be shown.
  • Fixed
    If checked, you can specify the number of the minor tick mark labels to be displayed on the axis.

Scale

Customizes the way in which to label the tick marks on the axis. Available only when the field on the category axis is one of the following types: Number, Date, DateTime, and Time, and not applied to scatter charts or when the category axis is used to show numeric data in bubble charts.

Use Constant Interval

Specifies whether to use a constant interval to label the tick marks. If checked, the values of the tick marks will be increased continually on the axis based on the following properties, instead of just using the data values.

Minimum

Specifies the minimum value which will be used to label the tick marks.

• Auto
  If checked, the minimum value will be defined by JReport automatically.
• Fixed
  If checked, you can define the minimum value as required. Input the value in the text box, or click and select a field from the drop-down list or use a formula to control it. You can also specify it in the calendar if the field on the category axis is of Date, DateTime or Time type.

Maximum

Specifies the maximum value which will be used to label the tick marks.

• Auto
  If checked, the maximum value will be defined by JReport automatically.
• Fixed
  If checked, you can define the maximum value as required. Input the value in the text box, or click and select a field from the drop-down list or use a formula to control it. You can also specify it in the calendar if the field on the category axis is of Date, DateTime or Time type.

Major Unit

Specifies the unit between two adjacent major tick marks.

• Auto
  If checked, the unit will be defined by JReport automatically.
• Fixed
  If checked, you can define the unit as required. If the field on the category axis is of the Date, DateTime or Time type, you can also choose a unit from the drop-down list.

Minor Unit

Specifies the unit between two adjacent minor tick marks.

• Auto
  If checked, the unit will be defined by JReport automatically.
• Fixed
  If checked, you can define the unit as required. If the field on the category axis is of the Date, DateTime or Time type, you can also choose a unit from the drop-down list.

Font

The tab consists of two sub tabs: Major Label and Minor Label.

Major Label

Specifies the font format of the major tick mark labels on the axis.

Font

Specifies the font format of text in the major tick mark labels.

• Font list
  Lists all the available font faces that can be selected to apply to the text.
• Font Size
  Specifies the font size of the text.
• Font Color
  Specifies the font color of the text.
• Transparency
  Specifies the transparency of the text.
• Rotation
  Specifies the rotation angle of the text around its center, in degrees. The default value is 0.
• Shearing
  Specifies the gradient of the text.

Effects

Specifies the special effects of text in the major tick mark labels.

• Style
  Specifies the font style of the text. It can be one of the following: plain, bold, italic, and bold italic.
• Strikethrough
  Specifies the style of the horizontal line with which the text is struck through. It can be one of the following: none, thin line, bold line, and double lines.
• Underline
  Specifies the style of the horizontal line under the text. It can be one of the following: none, single, single lower, bold line, bold lower, double lines, bold double, patterned line, and bold patterned.
• Superscript
  Raises the text above the baseline and changes the text to a smaller font size, if a smaller size is available.
• Embossed
  Makes the text appear to be raised off the page in relief.
• Outlined
  Displays the inner and outer borders of each character.
• Subscript
  Lowers the text below the baseline and changes the text to a smaller font size, if a smaller size is available.
• Engraved
  Makes the text appear to be imprinted or pressed into the page.
• Shadowed
  Adds a shadow beneath and to the right of the text.

Sample

Displays a sample of the specified font and any text effects.

Minor Label

Specifies the font format of the minor tick mark labels on the axis.

Correlate with Major Label

If checked, the font format of the minor tick mark labels will correlate with that of the major tick mark labels automatically. Only when it is unchecked can the font properties of the minor tick mark labels take effect.

Font

Specifies the font format of text in the minor tick mark labels.

• Font list
  Lists all the available font faces that can be selected to apply to the text.
• Font Size
  Specifies the font size of the text.
• Font Color
  Specifies the font color of the text.
• Transparency
  Specifies the transparency of the text.
• Rotation
  Specifies the rotation angle of the text around its center, in degrees. The default value is 0.
• Shearing
  Specifies the gradient of the text.

Effects

Specifies the special effects of text in the minor tick mark labels.

• Style
  Specifies the font style of the text. It can be one of the following: plain, bold, italic, and bold italic.
• Strikethrough
  Specifies the style of the horizontal line with which the text is struck through. It can be one of the following: none, thin line, bold line, and double lines.
• Underline
  Specifies the style of the horizontal line under the text. It can be one of the following: none, single, single lower, bold line, bold lower, double lines, bold double, patterned line, and bold patterned.
• Superscript
  Raises the text above the baseline and changes the text to a smaller font size, if a smaller size is available.
• Embossed
  Makes the text appear to be raised off the page in relief.
• Outlined
  Displays the inner and outer borders of each character.
• Subscript
  Lowers the text below the baseline and changes the text to a smaller font size, if a smaller size is available.
• Engraved
  Makes the text appear to be imprinted or pressed into the page.
• Shadowed
  Adds a shadow beneath and to the right of the text.

Sample

Displays a sample of the specified font and any text effects.

Orientation

The tab consists of two sub tabs: Major Label and Minor Label.

Major Label

Specifies the rotation angle of the major tick mark labels on the axis.

Automatic

Specifies to adjust the rotation angle of the major tick mark label text on the axis automatically according to the length of the label text, in degrees.

When this option is checked by default:

• If the text can be completely displayed horizontally, the default rotation angle will be 0.
• If the text cannot be completely displayed horizontally, the default rotation angle will be 30 anticlockwise, and the cut off part will be shown as suspension points.

Angle

Specifies to customize the rotation angle of the major tick mark label text on the axis. When you change the rotation angle in the text box, the red line in the spin box will change correspondingly, and vice versa.

Minor Label

Specifies the rotation angle of the minor tick mark labels on the axis.

Correlate with Major Label

If checked, the orientation setting of the minor tick mark labels will correlate with that of the major tick mark labels automatically. Only when it is unchecked can the orientation properties of the minor tick mark labels take effect.

Automatic

Specifies to adjust the rotation angle of the minor tick mark label text on the axis automatically according to the length of the label text, in degrees.

When this option is checked by default:

• If the text can be completely displayed horizontally, the default rotation angle will be 0.
• If the text cannot be completely displayed horizontally, the default rotation angle will be 30 anticlockwise, and the cut off part will be shown as suspension points.

Angle

Specifies to customize the rotation angle of the minor tick mark label text on the axis. When you change the rotation angle in the text box, the red line in the spin box will change correspondingly, and vice versa.

Format

The tab consists of two sub tabs: Major Label and Minor Label.

Major Label

Specifies the data format of the major tick mark labels on the axis.

Category

Lists the category types. Select one to customize its format.

Format

Displays all the formats of the selected category. Select the required one and click Add to add it as the format of the specified category. You can add only one format for each category. For more details about the formats, see A Detailed Chart Property Reference.

Properties

Displays the properties of the format you select. If the formats listed in the Format box cannot meet your requirement, define the format in the text field and then click Add to add it as the format of the specified category.

Sample

Displays the selected format effects.

Stack

Lists all the formats you select from different categories.

Add

Adds a format to the Stack list box.

Remove

Removes a format from the Stack list box.

Apply

Applies the specified format in the Stack list box to the major tick mark labels.

Minor Label

Specifies the data format of the minor tick mark labels on the axis.

Correlate with Major Label

If checked, the data format of the minor tick mark labels will correlate with that of the major tick mark labels automatically. Only when it is unchecked can the format properties of the minor tick mark labels take effect.

Category

Lists the category types. Select one to customize its format.

Format

Displays all the formats of the selected category. Select the required one and click Add to add it as the format of the specified category. You can add only one format for each category. For more details about the formats, see A Detailed Chart Property Reference.

Properties

Displays the properties of the format you select. If the formats listed in the Format box cannot meet your requirement, define the format in the text field and then click Add to add it as the format of the specified category.

Sample

Displays the selected format effects.

Stack

Lists all the formats you select from different categories.

Add

Adds a format to the Stack list box.

Remove

Removes a format from the Stack list box.

Apply

Applies the specified format in the Stack list box to the minor tick mark labels.

Range

The tab helps you to divide the catagory values into different range groups and edit data lables for them, and consists of two sub tabs: properties and data label.

Properties

Specifies the properties of the range groups.

Enable Range

Specifies whether to enable the range function.

• Special Group
  Opens the User Defined Group dialog to define how to group your the category values.

Gridline

Specifies the style for the range separating lines.

• Line Color
  Specifies the color of the range separating lines.
• Line Style
  Specifies the style of the range separating lines.
• Transparency
  Specifies the transparency for the color of the range separating lines.
• Thickness
  Specifies the thickness of the range separating lines, in pixels.

Fill

Specifies the fill effects for each range group.

• Group Name
  Shows the name of each range group.
• Color
  Specifies the color to be applied to each range group.
• Transparency
  Specifies the transparency for the color of each range group.

Data Label

Specifies the properties of the data labels in the range groups.

Show Data Labels

Specifies whether to show data labels for the range groups. Available only when the option Enable Range in the Properties tab is checked and range groups are defined.

• Edit Data Labels
  Opens the Data Label Editor to edit data labels for the range groups.

Value Label Type

Specifies the display type for data values in the value labels of each range group. It can be value, percent, value and percent.

Percent within Group

Specifies whether to calculate the percent value within each range group or across all range groups. Available only when percent or value and percent is select from the Value Label Type drop-down list.

Alignment

Specifies the alignment style for the data labels in each range group.

Size

Specifies the size of the data label area on the range groups.

• Height
  Specifies the height of the data label area. It cannot exceed the maximum height.
• Width
  Specifies the height of the data label area.
• Maximum Height
  Specifies the maximum height of the data label area. It cannot exceed the height of the chart paper.

Fill

Specifies the fill effect for the data label area.

• Color
  Specifies the color to fill the data label area.
• Transparency
  Specifies the transparency of the color.

Border

Specifies the properties of the border line for the data label area.

• Color
  Specifies the color of the border line.
• Line Style
  Specifies the style of the border line.
• Transparency
  Specifies the transparency for the color of the range separating lines.
• End Caps
  Specifies the ending style of the border line.
  • butt
    Ends unclosed sub paths and dash segments with no added decoration.
  • round
    Ends unclosed sub paths and dash segments with a round decoration that has a radius equal to half of the width of the pen.
  • square
    Ends unclosed sub paths and dash segments with a square projection that extends beyond the end of the segment to a distance equal to half of the line width.
• Thickness
  Specifies the thickness of the border line, in pixels.
• Line Joint
  Specifies the line joint style for the border line.
  • miter
    Joins path segments by extending their outside edges until they meet.
  • round
    Joins path segments by rounding off the corner at a radius of half the line width.
  • bevel
    Joins path segments by connecting the outer corners of their wide outlines with a straight segment.

Margin

Specifies the distance between the edges and the borders.

• Top
  Specifies the distance between the top edge and the top border.
• Bottom
  Specifies the distance between the bottom edge and the bottom border.
• Left
  Specifies the distance between the left edge and the left border.
• Right
  Specifies the distance between the right edge and the right border.

Padding

Specifies the distance between the data labels and the borders.

• Top
  Specifies the distance between the data labels and the top border.
• Bottom
  Specifies the distance between the data labels and the bottom border.
• Left
  Specifies the distance between the data labels and the left border.
• Right
  Specifies the distance between the data labels and the right border.

Behaviors

Specifies some web behaviors to the axis.

Adds a new web behavior line.

Removes the selected web behavior.

Moves the selected web behavior up a step.

Moves the selected web behavior down a step.

Events

Specifies the trigger event.

Actions
Specifies the action you want the event to trigger.

• 
  Opens the Web Action List dialog to bind a web action to the event.

Previous Page Next Page